The Best Floor Jack for 2023

Ensure adequate and safe vehicle repairs with our list of the best floor jacks of the year.

best floor jack

A good floor jack is an essential piece of equipment for anyone planning to undertake their own mechanical work or open a garage or repair company. Spare tires come with tiny, hand-cranked jacks that must support the entire weight of the vehicle on a very small area of the road.

On the other hand, a floor jack may be rolled into place, providing a larger base that is intrinsically more sturdy and is raised using a long handle that rapidly pumps a hydraulic cylinder. Doing so prevents wear and tear on the wrists from repeated movements.

Any standard floor jack will suffice to raise one corner of the typical automobile. In particular, crossovers, SUVs, and particularly low or heavy vehicles have specific requirements. However, you shouldn’t get just any floor jack because of how crucial it is. That’s why we went out and researched the best floor jacks and then tested and featured them for you. Even better, we’ve put up a detailed buyer’s guide to help you select the best floor jack for your vehicle and your needs.

How We Picked

  • Weight Capacity

    The weight capacity of a floor jack determines how much weight the jack can safely lift. If a floor jack is used to lift a load that exceeds its weight capacity, it can fail, potentially causing injury or damage to the vehicle being lifted. It is important to always check the weight capacity of a floor jack before using it and to ensure that the load being lifted does not exceed that capacity.

  • Specifications of Car

    The car's specifications, such as its weight and dimensions, are important considerations when choosing a floor jack because they determine what size and type of floor jack are suitable for the car. Using a floor jack that is not suited for a car can result in the jack failing to lift the car properly, which can be dangerous. It is important always to check the specifications of your car and choose a floor jack capable of lifting it safely.

  • Height Limit

    The height limit of a floor jack is an important consideration because it determines how high the jack can safely lift a load. If a floor jack is used to lift a load to a height that exceeds its height limit, it can fail, potentially causing injury or damage to the vehicle being lifted. It is important to always check the height limit of a floor jack before using it and to ensure that the load being lifted does not exceed that limit. This will help to ensure that the floor jack is used safely and effectively.

  • Cost-Effectiveness

    A floor jack is a necessary tool for anyone who works on vehicles, and it can be a lifesaver in the case of a flat tire or other emergencies. However, floor jacks can vary greatly in price and quality, and it is important to choose a jack that is both affordable and reliable. Therefore, we considered all other features and weighed them against the price to select various financial options that could offer what you need at a good cost.

Our Top Picks

Our Top Pick

Arcan Jack

Arcan Jack

Lightweight, air-craft grade aluminum, for easy maneuverability.

The 6,000-pound Lift Force is easily maneuverable because of the aircraft-grade aluminum used in its construction. The saddle of the floor jack can be quickly raised by a dual-piston pump, making it ready for use. There is a substantial improvement in strength, chassis torsional control, and longevity thanks to the reinforced lift arm. Mounted on the side, the handle Makes it possible to put the jack in a practical location. Complies with ASME PASE-2019 Safety Standard, has a minimum height of 3.75 inches, and a maximum height of 18 inches.

Buy Now for $289.59

The ratcheting mechanism of the lifting arm's design enables a controlled lift from any position on the upright. Thanks to the powder coating, the jack will last longer without rusting.

Our Runner-Up

Powerbuilt Xtra Low Profile Floor Vehicle Jack

Powerbuilt Xtra Low Profile Floor Vehicle Jack

Ball-bearing swivel casters for easy maneuvering.

Made to exacting standards for use on ultra-low or unibody vehicles. The jack can be lifted from a depth of 2 and 34 inches to a height of 15 and a half inches, and once it reaches that height, a sturdy safety bar prevents it from going any higher. Powerbuilt products are stylish, inventive, and affordably priced, and they conform to or surpass the requirements of the ASME and the PALD. It works wonderfully for hoisting minicars, tiny cars, and adapted trucks. The jack may be raised to its maximum height without the need for extra jack stands due to the sturdy safety bar. Easy-rolling stability and security under large loads are provided by the padded saddle, ball-bearing swivel caster wheels, and sturdy steel frame.

Buy Now for $279.90

Once the jack has been raised to its maximum height, the sturdy safety bar prevents it from falling. It works great on low-slung or customized vehicles, as well as vintage automobiles, unibody vehicles, and more.

Most Cost-Effective

BIG RED T820014S Torin Floor Jack

BIG RED T820014S Torin Floor Jack

Compact design allows use in confined places. Easily fits under low vehicles.

Equipped with a maximum lifting height of 13 inches and a minimum lifting height of 5-⅗ inches. This floor jack comes with a maximum carrying capacity of 1.5 tons (3,000 pounds). The jack's system is protected from overload via a safety bypass to ensure that accidents that may happen from overloading are prevented and you may easily move around on the floor thanks to the four massive steel casters and two swivel wheels.

Buy Now for $48.39

The sturdy steel used in the making of this hydraulic trolley floor jack ensures the jack's long life and gives it a distinctively industrial sheen.

Everything We Recommend

Our Top Pick

Arcan Jack

Arcan Jack

Lightweight, air-craft grade aluminum, for easy maneuverability.

$289.59

Buy Now

Our Runner-Up

Powerbuilt Xtra Low Profile Floor Vehicle Jack

Powerbuilt Xtra Low Profile Floor Vehicle Jack

Ball-bearing swivel casters for easy maneuvering.

$279.90

Buy Now

Most Cost-Effective

BIG RED T820014S Torin Floor Jack

BIG RED T820014S Torin Floor Jack

Compact design allows use in confined places. Easily fits under low vehicles.

$48.39

Buy Now

Who This Is For

Anyone who owns a vehicle with wheels, such as a car or truck, may need to purchase a floor jack. Floor jacks are a useful tool for lifting a vehicle off the ground, which can help change a tire, checking or replacing brake pads or other components, or performing other maintenance tasks. Some people may choose to keep a floor jack in their garage or car trunk in case of an emergency, while others may use one at a workshop or garage.

What is a floor jack?

A floor jack is a mechanical device that is used to lift a vehicle off the ground. It consists of a long handle that is used to operate a hydraulic mechanism, which raises a lifting pad or saddle that can be positioned under a vehicle. The lifting pad is then used to support the weight of the vehicle, allowing the wheels to be lifted off the ground. Floor jacks are commonly used for changing tires, performing maintenance, or working on a vehicle’s undercarriage. They are a useful tool for anyone who owns a vehicle with wheels.

What strength should I look for?

When purchasing a floor jack, it is important to consider the weight of the vehicle that will be lifted. Most floor jacks are rated for a maximum weight capacity, which is the maximum amount of weight they can safely support. If a floor jack is used to lift a vehicle that exceeds its weight capacity, it could fail and potentially cause serious injury. Heavy-duty 3- or 4-ton variants of steel jacks are becoming more commonplace, displacing the less powerful 1.5-ton models. Most professionals only need a 2.5-ton machine, but repair businesses typically purchase 3-ton machines just to be safe.

Different types of jack

There are several types of jacks, including hydraulic jacks, mechanical jacks, and bottle jacks. A hydraulic jack uses fluid pressure to lift heavy objects, while a mechanical jack uses a screw mechanism to raise and lower objects. A bottle jack is a type of hydraulic jack that is shaped like a bottle and is used for lifting heavy vehicles. Additionally, there are other specialized jacks such as car jacks, which are designed specifically for lifting cars, and scissor jacks, which use a scissor-like mechanism to raise and lower objects.

Hydraulic jacks are typically more powerful and can lift heavier objects than mechanical jacks. They are also often easier to use, as the fluid pressure does the work of raising the load, so the user only needs to pump a handle or switch to activate the jack. However, hydraulic jacks can be more expensive and can fail if the hydraulic system develops a leak.

Mechanical jacks, on the other hand, are generally less expensive and are less likely to fail than hydraulic jacks. They are also easier to repair if they do break down. However, they require more effort to use, as the user must crank a handle to raise the load. They are also typically not as powerful as hydraulic jacks and may not be able to lift as heavy of a load.

Bottle jacks are a type of hydraulic jack that is shaped like a bottle and are used for lifting heavy vehicles. They are often smaller and more portable than other types of jacks, which makes them useful for roadside emergencies. However, they are not as powerful as some other types of jacks and may not be able to lift the heaviest loads.

In general, the type of jack that is best for a given situation will depend on factors such as the weight of the object being lifted, the available space, and the user’s needs and preferences.

Why You Should Trust Us

To raise a car’s undercarriage, a floor jack with wheels attached to it uses hydraulic pressure to raise a hinged platform. Because of the limited space under most current passenger vehicles, these have largely replaced the traditional “bottle jacks” in which a hydraulic cylinder directly raises the vehicle. On trucks, though, bottle jacks can still be a cheap option. It is imperative that all necessary precautions be taken before lifting any vehicle. Therefore, the jack safely supports the vehicle while you work underneath it.

Each and every one of the jacks we picked out had a safety bypass valve built right in. The price, user reviews, lift capacity, front profile, lifting height, reach, jack weight, and suitability for various vehicle types (sedan, sports car, and truck) were also considered. All possible budgets were accommodated by carefully selecting jacks from a wide price range.

How We Picked

Weight Capacity

The weight capacity of a floor jack is important because it determines how much weight the jack can safely lift. Using a floor jack that is not rated to support the weight of the vehicle you are lifting can be dangerous and can cause the jack to fail, potentially leading to injury or damage to your vehicle. It is important to always use a floor jack that is rated to support the weight of your vehicle and to never exceed the weight capacity of the jack.

Assuming that a ton is equal to 2,000 pounds, a jack with a capacity of three tons would be able to support 6,000 pounds. That said, you’d be mistaken if you assumed that meant your car had to weigh less than 6,000 pounds for the jack to work. Because the vehicle jack can only lift your car by a maximum of half at a time. But remember that a vehicle’s engine is where the bulk of the vehicle’s mass is concentrated. This component is typically located in the front of the vehicle’s engine, though this is not always the case. Still, to be on the safe side, you should subtract two-thirds of your vehicle’s weight from the total to find out how many tons you need. So, if your car weighs in at 9,000 pounds, you’ll need a jack that can handle at least 3 tons.

Height Limit

The height limit of a floor jack is the maximum height to which the jack can safely lift a vehicle. This is important because using a floor jack that is not tall enough to lift your vehicle can be dangerous and can result in the jack not being able to properly support the weight of the vehicle. On the other hand, using a floor jack that is too tall for your vehicle can also be dangerous, as it can cause the jack to be unstable and potentially tip over. It is important to always use a floor jack that is the proper height for your vehicle and to never exceed the height limit of the jack.

Specifications of Car

Car specifications are important when choosing a floor jack because the jack needs to be capable of lifting the weight of the car. If the jack is not strong enough to lift the weight of the car, it could fail and cause the car to fall, potentially leading to injury or damage. Additionally, the size and height of the jack should be appropriate for the size and height of the car to ensure that it can be used safely and effectively. It is always important to read the specifications of a floor jack and make sure it is suitable for your car before purchasing and using it.

Material

The material that a floor jack is made of can affect its strength, durability, and overall performance. For example, a jack made of steel is likely to be stronger and more durable than one made of plastic. Steel jacks are also typically more expensive than plastic jacks, but they may be worth the extra cost if you need a jack that can withstand heavy use or lift very heavy vehicles. Additionally, the type of material used in the construction of a floor jack can affect its weight and portability, with lighter materials such as aluminum making for a more portable jack. Ultimately, the material of a floor jack should be chosen based on the intended use and the specific needs of the user.

Durability

Durability is important when choosing a floor jack because a durable jack is likely to last longer and provide more reliable performance over time. A durable floor jack is also less likely to break or fail during use, which can be dangerous and can cause damage to the car. In general, floor jacks made of high-quality materials such as steel are more durable than those made of lower-quality materials such as plastic. Additionally, floor jacks with well-constructed mechanisms and sturdy designs are typically more durable than those with flimsy or poorly-made parts. Durability should be a consideration when choosing a floor jack to ensure that the jack you purchase will be able to withstand regular use and provide reliable performance over time.

Price vs. Quality

When it comes to purchasing a floor jack, it’s important to consider both the price and the quality of the product. A floor jack is a tool that is designed to lift heavy objects, so it’s important to make sure that it is both reliable and safe to use. A floor jack that is of poor quality or that is not built to withstand the weight of the items you need to lift could potentially fail and cause serious injury. On the other hand, a high-quality floor jack may be more expensive upfront, but it will be more durable and able to handle the weight of your load safely. In the long run, a high-quality floor jack can actually save you money by lasting longer and reducing the need for costly repairs or replacements. We carefully considered both the price and the quality of the product to ensure that you are getting the best value for your money.

Type of Car

When it comes to purchasing a floor jack, it’s important to consider the type of car that you will be using it with. Different types of cars have different weight capacities and lifting points, so it’s important to make sure that the floor jack you choose is capable of safely lifting your car. If you choose a floor jack that is not rated to handle the weight of your car, it could potentially fail and cause serious injury. Additionally, some floor jacks are designed for specific types of cars, such as sedans or SUVs, so it’s important to choose a floor jack that is appropriate for your car. By considering the type of car you will be using the floor jack with, you can ensure that you are choosing a product that is safe and effective.

Our Picks For You

Our Top Pick - Arcan Jack

Our Top Pick

Arcan Jack

Arcan Jack

Lightweight, air-craft grade aluminum, for easy maneuverability.

The 6,000-pound Lift Force is easily maneuverable because of the aircraft-grade aluminum used in its construction. The saddle of the floor jack can be quickly raised by a dual-piston pump, making it ready for use. There is a substantial improvement in strength, chassis torsional control, and longevity thanks to the reinforced lift arm. Mounted on the side, the handle Makes it possible to put the jack in a practical location. Complies with ASME PASE-2019 Safety Standard, has a minimum height of 3.75 inches, and a maximum height of 18 inches.

Buy Now for $289.59

Who It's For

The Arcan Jack is best suited for those with vehicles that do not go too low and who prefer lightweight floor jacks to heavy metal equipment.

Why It's Great

The 3-ton lifting capability and dual-pump piston action of Arcan's Aluminum Floor Jack ensure it's suitable for most automobiles. The reinforced lifting arm helps with strength and torsion control, and it can raise automobiles between 3.75 and 18 inches off the ground.

Potential Flaws

Most users have complained that this saddle which weighs 56 pounds is a bit too heavy, has a wide profile, and rolls on aluminum casters and wheels that are prone to pitting, making it difficult to use. If you happen to be one of such, we recommend that you try out our cost-efficient pick.

Other Features

There are at least five additional brands, including Sunex 6603ASJ, that produce the same three-ton floor jack as this Jack. However, having a lifting capacity of three tons, this is no ordinary hydraulic jack. Because of its aluminum construction, it's around 15 to 20 pounds lighter than a similar steel vehicle jack, making it more manageable in a tight space like a garage. It also weighs over 60 pounds, but the broad, practical handles make it easy to carry; otherwise, the casters move smoothly.

It incorporates dual pump pistons to quickly lift the 4.5-inch rotating saddle, and a reinforced lift arm for greater strength, chassis torsion control, and longevity. To go from the minimum height of 3.5 inches to the maximum height of 19.25 inches, we determined that it takes roughly 10 complete pumps. A rubber insert in the saddle isn't very practical, but the foam handle bumper can prevent damage to your car if you bump it by accident. We haven't found that the side-mounted handles get in the way, and they've been helpful for positioning.

Product Specifications

Item Dimensions: 30 x 13.5 x 8 inches
Item Weight: 56.00 lbs
Load Capacity: 3.0 tons
Material: Aluminum
Maximum Lifting Height: 18.0 inches
Minimum Height: 11.62 inches

Our Runner-Up - Powerbuilt Xtra Low Profile Floor Vehicle Jack

Our Runner-Up

Powerbuilt Xtra Low Profile Floor Vehicle Jack

Powerbuilt Xtra Low Profile Floor Vehicle Jack

Ball-bearing swivel casters for easy maneuvering.

Made to exacting standards for use on ultra-low or unibody vehicles. The jack can be lifted from a depth of 2 and 34 inches to a height of 15 and a half inches, and once it reaches that height, a sturdy safety bar prevents it from going any higher. Powerbuilt products are stylish, inventive, and affordably priced, and they conform to or surpass the requirements of the ASME and the PALD. It works wonderfully for hoisting minicars, tiny cars, and adapted trucks. The jack may be raised to its maximum height without the need for extra jack stands due to the sturdy safety bar. Easy-rolling stability and security under large loads are provided by the padded saddle, ball-bearing swivel caster wheels, and sturdy steel frame.

Buy Now for $279.90

Who It's For

Powerbuilt's Xtra Low Profile Floor Jack is suitable for vehicles as low as 2.75 inches and can be raised as high as 15.5 inches, making it ideal for those with lowered vehicles as well as those with standard sports cars and classics.

Why It's Great

This precision jack can easily fit under low-profile vehicles because it starts at a height of 2-3/4 inches. Once the jack has been raised to its maximum height, the strong safety bar keeps it from going back down. This means you don't need a jack stand. It works great for modified cars, classic cars, unibody cars, and other vehicles with low clearance or hard-to-reach places.

Potential Flaws

Lifting capacity is limited to 2 tons, and there is only one handle to carry nearly 60 pounds. Because of its shallowness, it must be checked for leaks and bled before being put to use. In addition, the saddle is quite small and fixed in place. There's a rubber insert, but that's not going to hold up in any jack for very long. While this option is great for small cars, we recommend our top pick if you intend to do some heavy jacking.

Other Features

With a maximum height of 15.4 inches, the Powerbuilt Xtra Low Profile Floor Jack is suitable for vehicles with a ground clearance as low as 2.75 inches. It's also a fantastic choice if you have a unibody car and can't easily set up jack stands because there aren't any frame rails to grab onto. This is because the jack is equipped with a steel safety bar that slides under the lift arm and locks it in the up position. The manufacturer insists that jack stands aren't necessary thanks to the safety bar, but we'd still like to have them nearby every time we worked underneath the car.

The 58.7-pound all-steel build is a negative aspect, and the arm design limits how far you can slide it under your car. It folds down to a manageable 13.4 x 24.7 x 7.75 inches. This floor jack has a wide base and roller for added stability, and its ball-bearing swivel casters allow for simple transportation around your workshop. There is a carry handle on the back of the jack for convenient transport and storage when it is not in use.

Product Specifications

Item Dimensions: 13.4 x 24.7 x 7.75 inches
Item Weight: ‎58.7 Pounds
Load Capacity: 2 tons
Material: ‎Alloy Steel
Maximum Lifting Height: 4 inches
Minimum Height: 2.75 Inches

Most Cost-Effective - BIG RED T820014S Torin Floor Jack

Most Cost-Effective

BIG RED T820014S Torin Floor Jack

BIG RED T820014S Torin Floor Jack

Compact design allows use in confined places. Easily fits under low vehicles.

Equipped with a maximum lifting height of 13 inches and a minimum lifting height of 5-⅗ inches. This floor jack comes with a maximum carrying capacity of 1.5 tons (3,000 pounds). The jack's system is protected from overload via a safety bypass to ensure that accidents that may happen from overloading are prevented and you may easily move around on the floor thanks to the four massive steel casters and two swivel wheels.

Buy Now for $48.39

Who It's For

The Torin T820014S is suitable for use when you are away from mobile phone service and AAA is unable to assist you due to a flat tire.

Why It's Great

For its price, this floor jack can perform well without disappointment. It has a decent lifting clearance and can hold your vehicle up while you work. It has been recognized as solid and reliable and provides excellent features past its expectation at that price.

Potential Flaws

The maximum load that may be lifted is only 1.5 tons (3,000 pounds). Being so compact makes it less stable than a regular floor jack. A front profile of 5.5 inches can be too high to fit under some extremely low-slung vehicles. If your vehicle is on the lower side, then you may want to consider the Xtra Low Profile Floor Vehicle Jack.

Other Features

This jack comes with a convenient plastic blow mold carrying box for stowing away when not in use; Limited manufacturer guarantee of 1 year. The minimum lifting height is 5-3/5 inches and the maximum is 13 inches; it has a capacity of 1.5 tons (3,000 pounds) and is suitable for most vehicles. The sturdy steel used in the making of a hydraulic trolley floor jack ensures the jack's long life and gives it a distinctively industrial sheen. The system is protected from overload via a safety bypass. A plastic blow mold carrying box is included for convenience, and there is a one-year warranty from the maker. Easily move around on the floor thanks to the four massive steel casters and two swivel wheels.

Product Specifications

Item Dimensions: 18.3 x 7.7 x 5.3 inches
Item Weight: ‎18 Pounds
Load Capacity: 1.5 tons
Material: ‎Alloy Steel
Maximum Lifting Height: 13 Inches
Minimum Height: 5.6 Inches

Almost Made The Cut - Pro-Lift F-767 Floor Jack

Almost Made The Cut

Pro-Lift F-767 Floor Jack

Pro-Lift F-767 Floor Jack

Heavy-duty steel construction provides long-term durability.

The Pro-Lift F-767 Grey Little Profile Floor Jack is a 2 Ton floor jack that allows for easier access to vehicles with low ground clearance. The range of your lift will be from 3-1/2 inches to 14 inches. The Jack may be slid beneath a space of 3-1/2 inches and moved into place with relative ease. Furthermore, the Pro-Lift F-767 floor jack is built to last with a heavy-duty steel frame. Overpumping is prevented by the proprietary bypass system found only in the Pro Lift with an internal safety valve to prevent damage from an overload.

Buy Now for $88.68

Who It's For

We suggest the Pro-Lift jack if you don't frequently work on your automobile but yet want to make a significant improvement over a scissor jack.

Why It's Great

The 2 Ton capacity of the Pro-Lift F-767 Grey Low Profile Floor Jack allows for easier access to vehicles with less ground clearance. Moreover, it provides a working height of between 3-1/2 and 14 inches for lifting, giving you adequate access to manage your activity.

Potential Flaws

The user manual states that the Pro-Lift F-767 jack is covered by a two-year warranty, however, users have stated that this lasts only 90 days and the cost of shipping to Pro-Lift for warranty service could exceed the price of the jack itself. The Pro-Raise F-767 also has some issues, the most significant being the excessive number of pumps required for a complete lift. After bringing it into the AutoGuide Garage, we tested it out prior to bleeding and found that it required 52 pumps to reach full pressure. Our Arcan double-cylinder jack only requires seven. So, if you want to go for higher quality, we recommend that you try our top pick, or if you are on a tight budget, our cost-efficient pick.

Other Features

This two-ton, single-cylinder, low-profile automobile jack has a lifting capacity of 3.5 to 14 inches. Because too much pressure on a pump might damage its seals and valves, the manufacturer employs a proprietary bypass method to prevent this problem, and a built-in safety valve safeguards against overload. While these additions do make driving more secure, never go beneath a car without first supporting it with jack stands.

With a top handle made of molded plastic, this hydraulic jack is easily lifted and weighs only 30 pounds, making it much easier to move than comparable models. These top-handled, lighter-duty automobile jacks have served us well in the past. Its dimensions are 17.91 x 5.32 x 8.47 inches, making it smaller than the huge jacks. Although it's less stable than a dual-cylinder quick-lift jack and requires more pumps to raise to the same height, almost little is out of reach because the jack's lowest height is only 3.5 inches. This little 2.25-inch saddle may be turned freely. Even though it doesn't have a huge footprint, this jack can fit into tight spaces that a standard garage jack might not be able to.

Product Specifications

Item Dimensions: ‎17.91 x 5.32 x 8.47 inches
Item Weight: ‎30 Pounds
Load Capacity: 2 tons
Material: ‎Alloy Steel
Maximum Lifting Height: 14 Inches
Minimum Height: 9 Centimeters

Care and Maintenance

Do not crawl under a vehicle held up by a jack

It is never safe to crawl under a vehicle that is held up by a jack. When a vehicle is supported by a jack, it is not stable and can easily fall if the jack fails or is not properly positioned. Crawling under a vehicle that is supported by a jack puts you at risk of being crushed if the vehicle falls. It is important to use proper jack stands or other supports to hold the vehicle securely in place before crawling underneath it. Additionally, it is important to make sure that the jack is properly positioned and in good working condition before attempting to lift the vehicle. Always use caution when working under a vehicle and follow the manufacturer’s instructions for safely using a jack.

How to lift

To lift a car with a floor jack, first make sure that the car is parked on a level surface and the parking brake is engaged. Then, consult the owner’s manual to determine the proper jacking points on the car. These are typically located near the corners of the car and are reinforced to support the weight of the car when it is lifted. Once you have identified the jacking points, position the floor jack underneath the car, making sure that it is centered and directly beneath the jacking point. Then, slowly and carefully pump the handle of the jack to lift the car off the ground. Make sure to periodically check the stability of the jack and the vehicle as it is lifted to ensure that it is secure. Once the car is lifted to the desired height, use jack stands to support the weight of the vehicle before crawling underneath it. Always use caution when working under a vehicle and follow the manufacturer’s instructions for safely using a jack.

How to lower

To lower a car that has been lifted with a floor jack, first make sure that the car is securely supported by jack stands or other suitable supports. Once the car is stable and no longer supported by the jack, carefully release the pressure on the jack by slowly turning the release valve or pressing the release button, depending on the type of jack you are using. This will allow the jack to slowly lower the car back to the ground. As the car is lowered, make sure to keep your hands and fingers clear of the jack and any other moving parts to avoid injury. Once the car is back on the ground, carefully remove the jack stands and verify that the car is stable and secure before driving away.

Ensure the jack is secure

To ensure that a floor jack is secure, follow these steps:

  • Place the jack on a flat, stable surface that is capable of supporting the weight of the vehicle.
  • Position the jack near the lift point on the vehicle, following the manufacturer’s instructions.
  • Engage the safety lock or locks on the jack to prevent it from lowering unexpectedly.
  • Slowly and carefully raise the jack until it is in contact with the lift point on the vehicle.
  • Slowly and carefully apply pressure to the jack handle to raise the vehicle off the ground.
  • Once the vehicle is lifted, place the jack stands under the vehicle for additional support.
  • Carefully lower the vehicle onto the jack stands, and then release the pressure on the jack handle.
  • Double-check that the jack stands are securely in place and that the vehicle is stable and secure before working on it.

It is important to always follow the manufacturer’s instructions when using a floor jack and to exercise caution and common sense to avoid accidents. It is also a good idea to have a second person assist with the lifting and supporting of the vehicle, to provide an extra level of safety.

Getting the right strength and type for your car before buying

To get the right strength and type of floor jack for your car, you will need to consider a few factors. First, you will need to know the weight and size of your car, as well as the type of suspension it has. This will determine the minimum capacity and size of the jack you will need. You should also consider the type of surface you will be using the jack on, as well as the type of work you will be doing with it.

Once you have this information, you can use a chart or online calculator to determine the appropriate size and strength of the jack you need. You can then choose a jack with the right specifications from a reputable manufacturer or retailer.

It is important to choose a high-quality, durable jack that is capable of supporting the weight of your vehicle. You should also consider the warranty and customer service offered by the manufacturer, as well as any additional features or accessories that may be useful for your needs. It is also a good idea to read reviews like ours and compare prices to ensure you are getting the best value for your money.